How to Change Battery in 2019 Gmc Key Fob


How to Change Battery in 2019 GMC Key Fob: A Step-by-Step Guide

The key fob is an essential component of modern vehicles, providing convenience and security to car owners. However, like any other battery-operated device, the key fob’s battery will eventually need to be replaced. If you own a 2019 GMC and need to change the battery in your key fob, here is a step-by-step guide to help you through the process.

Step 1: Gather the necessary items
Before you begin, make sure you have the following items handy: a new CR2032 battery (commonly used in key fobs), a small flat-head screwdriver, and a clean cloth.

Step 2: Locate the battery compartment
On the back of your key fob, you will find a small slot. Insert the screwdriver into the slot and gently twist it to pry open the key fob. Be careful not to apply excessive force to avoid damaging the key fob.

Step 3: Remove the old battery
Once the key fob is open, you will see the battery compartment. Carefully remove the old battery by gently pushing it out from its holder. Use the cloth to clean any dirt or debris from the compartment.

Step 4: Insert the new battery
Take the new CR2032 battery and place it into the battery holder, ensuring that the positive (+) side is facing up. Gently press the battery down to secure it in place.

Step 5: Close the key fob
Align the two halves of the key fob and press them together until you hear a click, indicating that it is securely closed.

See also  How to Install Showbox in Kodi

Step 6: Test the key fob
To ensure that the battery replacement was successful, test the key fob by pressing the buttons. If the key fob is working correctly, you have successfully changed the battery.

Common Questions about Changing the Battery in a 2019 GMC Key Fob:

Q1: How often should I replace the battery in my key fob?
A1: Key fob batteries typically last around 2-3 years, depending on usage. However, it is recommended to replace the battery if you notice a decrease in range or responsiveness.

Q2: Can I use any type of battery for my key fob?
A2: It is best to use the recommended battery type for your specific key fob model, which is usually a CR2032 battery.

Q3: Can I change the battery myself, or do I need to visit a dealership?
A3: Changing the battery in your key fob is a simple process that you can do yourself. However, if you are unsure or uncomfortable, you can always visit a dealership for assistance.

Q4: What if my key fob doesn’t work after changing the battery?
A4: Ensure that the battery is correctly inserted, and the key fob is securely closed. If the issue persists, consult your vehicle’s manual or contact a GMC dealership for further assistance.

Q5: How much does a replacement key fob battery cost?
A5: Replacement key fob batteries are relatively inexpensive, typically costing around $2 to $5.

Q6: Will changing the key fob battery affect my vehicle’s programming?
A6: No, changing the key fob battery will not affect your vehicle’s programming. The key fob should work normally after battery replacement.

See also  How to Reset Subaru Bluetooth

Q7: Can I use a rechargeable battery in my key fob?
A7: It is not recommended to use rechargeable batteries in your key fob, as they may not provide the necessary voltage for proper functioning.

Q8: Can I change the battery in my key fob if it is water-resistant?
A8: Yes, you can change the battery in a water-resistant key fob using the same procedure. Just ensure that the key fob is dry before replacing the battery.

Q9: Can I use a key fob with a low battery?
A9: It is not recommended to use a key fob with a low battery, as it may lead to unreliable performance or complete failure.

Q10: How do I dispose of the old key fob battery?
A10: It is important to dispose of the old key fob battery properly. Check with your local recycling center or electronic waste disposal facility for the correct disposal method.

Q11: Can I reprogram my key fob after changing the battery?
A11: In most cases, key fobs do not require reprogramming after a battery change. However, consult your vehicle’s manual or contact a GMC dealership for specific instructions.

Q12: Can I prevent my key fob battery from draining quickly?
A12: To extend the battery life, avoid continuously pressing the buttons on the key fob and store it in a cool, dry place when not in use.

By following these simple steps, you can easily change the battery in your 2019 GMC key fob and ensure that it continues to provide convenience and security for your vehicle.

Scroll to Top